Vpn Microsoft Remote Desktop



VPN vs Remote Desktop. When comparing VPN vs remote desktop there are two main concerns: flexibility and security. While having some similarities, VPN and remote desktop are functionally different things. A VPN will give you access to a network while remote desktop (or RDP) will give you control of an entire computer. If your company uses Windows to create a VPN connection to the workplace network, here’s what you need to do to connect to its VPN service: Click the Notifications icon on the right side of the taskbar. The Action Center appears.

University faculty and staff can access their on-campus Microsoft-Windows-based computer from home another off-campus locations by using Remote Desktop.

Work computer is used in the following instructions to refer to the remote computer you wish to access. Home computer refers to the device used to initiate the remote session.

Requirements

  • The work computer must be using Microsoft Windows, and must be powered on and awake. (It can be locked, and logged on or off.)
  • You must have Administrator access on your work computer (contact the Help Desk if you’re unsure.)
  • You must have Boise State VPN software installed and configured on the home computer.
  • You must know your work computer’s computer name. (To find your computer name, type “Computer name” in the Windows search bar and select View your PC name. A Settings window will appear. Look for the “Device Name” – this is your computer name.)
  • If you are using a Mac as your home computer you must download and install the latest version of Microsoft Remote Desktop from the App Store.

How to Connect with Remote Desktop

From Microsoft Windows

  1. Launch Boise State’s Cisco AnyConnect VPN and sign in.
  2. Once your VPN session is established, launch Remote Desktop Connection (select Start, type “Remote Desktop”, and run the application).
  3. When prompted for the computer name, enter the name of your work computer and select Connect.
  4. When prompted for a user name, enter your Boise State email address (e.g., BusterBronco@boisestate.edu) and password.
  5. You should now be connected to the work computer desktop.

How to Disconnect

  1. Select Start > Power > Disconnect on your work computer. This will leave your session intact so you can pick up again when you come into work, or if connect again from home.
  2. Disconnect your Cisco AnyConnect VPN session if you are finished.

From Apple macOS

  1. Launch Boise State’s Cisco AnyConnect VPN and sign in. [If you are using macOS Catalina (10.15) you may need to install the 64-bit version of Cisco AnyConnect VPN.]
  2. Once your VPN session is established, launch Microsoft Remote Desktop from your Applications folder.
  3. Select Add PC. Enter the computer name for your work computer, then select Add.
  4. A new entry for your work computer will appear. Double-click this entry to start your remote desktop session.
  5. When prompted for a user name, enter your Boise State email address (e.g., BusterBronco@boisestate.edu) and password.
  6. You may receive a security warning (and that’s okay). Select Continue.
  7. You should now be connected to the work computer desktop.

How to Disconnect

  1. Select Start > Power > Disconnect on your work computer. This will leave your session intact so you can pick up again when you come into work, or if connect again from home.
  2. Disconnect your Cisco AnyConnect VPN session if you are finished.

How secure is Windows Remote Desktop?

Remote Desktop sessions operate over an encrypted channel, preventing anyone from viewing your session by listening on the network. However, there is a vulnerability in the method used to encrypt sessions in earlier versions of RDP. This vulnerability can allow unauthorized access to your session using a man-in-the-middle attack.

Remote Desktop can be secured using SSL/TLS in Windows Vista, Windows 7, Windows 8, Windows 10 and Windows Server 2003/2008/2012/2016. *Some systems listed are no longer supported by Microsoft and therefore do not meet Campus security standards. If unsupported systems are still in use, a security exception is required.

While Remote Desktop is more secure than remote administration tools such as VNC that do not encrypt the entire session, any time Administrator access to a system is granted remotely there are risks. The following tips will help to secure Remote Desktop access to both desktops and servers that you support.

Basic Security Tips for Remote Desktop

1. Use strong passwords

Strong passwords on any accounts with access to Remote Desktop should be considered a required step before enabling Remote Desktop. Refer to the campus password complexity guidelines for tips.

2. Use Two-factor authentication

Departments should consider using a two-factor authentication approach. This topic is beyond the scope of this article, but RD Gateways can be configured to integrate with the Campus instance of DUO. Other unsupported by campus options available would be a simple mechanism for controlling authentication via two-factor certificate based smartcards. This approach utilizes the Remote Desktop host itself, in conjunction with YubiKey and RSA as examples.

3. Update your software

One advantage of using Remote Desktop rather than 3rd party remote admin tools is that components are updated automatically with the latest security fixes in the standard Microsoft patch cycle. Make sure you are running the latest versions of both the client and server software by enabling and auditing automatic Microsoft Updates. If you are using Remote Desktop clients on other platforms, make sure they are still supported and that you have the latest versions. Older versions may not support high encryption and may have other security flaws.

4. Restrict access using firewalls

Use firewalls (both software and hardware where available) to restrict access to remote desktop listening ports (default is TCP 3389). Using an RDP Gateway is highly recommended for restricting RDP access to desktops and servers (see discussion below). As an alternative to support off-campus connectivity, you can use the campus VPN software to get a campus IP address and add the campus VPN network address pool to your RDP firewall exception rule. Visit our page for more information on the campus VPN service.

5. Enable Network Level Authentication

Windows 10, Windows Server 2012 R2/2016/2019 also provide Network Level Authentication (NLA) by default. It is best to leave this in place, as NLA provides an extra level of authentication before a connection is established. You should only configure Remote Desktop servers to allow connections without NLA if you use Remote Desktop clients on other platforms that don't support it.

  • NLA should be enabled by default onWindows 10, Windows Server 2012 R2/2016/2019.

  • To check you may look at Group Policy setting Require user authentication for remote connections by using Network Level Authentication found at ComputerPoliciesWindows ComponentsRemote Desktop ServicesRemote Desktop Session HostSecurity. This Group Policy setting must be enabled on the server running the Remote Desktop Session Host role.

6. Limit users who can log in using Remote Desktop

By default, all Administrators can log in to Remote Desktop. If you have multiple Administrator accounts on your computer, you should limit remote access only to those accounts that need it. If Remote Desktop is not used for system administration, remove all administrative access via RDP, and only allow user accounts requiring RDP service. For Departments that manage many machines remotely remove the local Administrator account from RDP access at and add a technical group instead.

  1. Click Start-->Programs-->Administrative Tools-->Local Security Policy

  2. Under Local Policies-->User Rights Assignment, go to 'Allow logon through Terminal Services.' Or “Allow logon through Remote Desktop Services”

  3. Remove the Administrators group and leave the Remote Desktop Users group.

  4. Use the System control panel to add users to the Remote Desktop Users group.

A typical MS operating system will have the following setting by default as seen in the Local Security Policy:

The problem is that “Administrators” is here by default, and your “Local Admin” account is in administrators. Although a password convention to avoid identical local admin passwords on the local machine and tightly controlling access to these passwords or conventions is recommended, using a local admin account to work on a machine remotely does not properly log and identify the user using the system. It is best to override the local security policy with a Group Policy Setting.

To control access to the systems, even more, using “Restricted Groups” via Group Policy is also helpful.

If you use a “Restricted Group” setting to place your group, e.g., “CAMPUSLAW-TECHIES” into “Administrators” and “Remote Desktop Users,” your techies will still have administrative access remotely, but using the steps above, you have removed the problematic “local administrator account” having RDP access. Going forward, whenever new machines are added in the OU under the GPO, your settings will be correct.

7. Set an account lockout policy

Vpn Microsoft Remote Desktop

By setting your computer to lock an account for a set number of incorrect guesses, you will help prevent hackers from using automated password guessing tools from gaining access to your system (this is known as a 'brute-force' attack). To set an account lockout policy:

  1. Go to Start-->Programs--> Administrative Tools--> Local Security Policy
  2. Under Account Policies--> Account Lockout Policies, set values for all three options. Three invalid attempts with 3-minute lockout durations are reasonable choices.

Best Practices for Additional Security

Microsoft Remote Desktop Android Vpn

1. Do not allow direct RDP access to clients or servers from off campus.

Having RDP (port 3389) open to off campus networks is highly discouraged and is a known vector for many attacks. The options below list ways of improving security while still allowing RDP access to system.

Microsoft remote desktop using vpn

Once an RDP gateway has been set up, hosts should be configured to only allow RDP connections from the Gateway host or campus subnets where needed.

2. Use RDP Gateways (Best Option)

Using an RDP Gateway is strongly recommended. It provides a way to tightly restrict access to Remote Desktop ports while supporting remote connections through a single 'Gateway' server. When using an RD Gateway server, all Remote Desktop services on your desktop and workstations should be restricted to only allow access only from the RD Gateway. The RD Gateway server listens for Remote Desktop requests over HTTPS (port 443) and connects the client to the Remote Desktop service on the target machine.

  1. Utilize Campus RDP Gateway Service. This is the best option to allow RDP access to system categorized as UC P2 and lower. Includes DUO integration. RDP Gateway Service is provided by the Windows Team. Documentation is available here: https://berkeley.sharepoint.com/sites/calnetad/gateway.

    The RDP Gateway Service also supports the new Remote Access Services requirement of the draft MSSND update (requirement 8), which requires the use of an approved service (i.e., RDP gateway, dedicated gateway, or bSecure VPN) for access to the UC Berkeley network from the public Internet.

  2. Dedicated Gateway Service (Managed). Needed for rdp access to systems that are UC P4 or higher. Must also be configured for DUO
    Some campus units use an IST managed VPS as an RD Gateway. A rough estimate might be that 30-100 concurrent users can use one RD Gateway. The HA at the virtual layer provides enough fault-tolerant and reliable access; however a slightly more sophisticated RD gateway implementation can be done with network load balancing.

  3. Dedicated Gateway Service (Unmanaged). Installing and configuring RD Gateway on department run hardware.
    There are many online documents for configuring this embedded Windows 2016/2019 component. The official documentation is here: https://docs.microsoft.com/en-us/windows-server/remote/remote-desktop-se...
    Installing the configuring, the role service is mostly as described; however, using a Calnet issued trusted Comodo certificate is recommended. Using a self-signed cert is ok for testing, and using a CalnetPKI cert can work if all clients have trusted the UCB root. The Comodo cert is usually better accepted so that your end users do not receive certificate warnings.
    Configuring your client to use your RD Gateway is simple.The official documentation for the MS Client is here: http://technet.microsoft.com/en-us/library/cc770601.aspx

In essence, a simple change on the advanced tab of your RDP client is all that is necessary:


3. Change the listening port for Remote Desktop

Changing the listening port will help to 'hide' Remote Desktop from hackers who are scanning the network for computers listening on the default Remote Desktop port (TCP 3389). This offers effective protection against the latest RDP worms such, as Morto. To do this, edit the following registry key (WARNING: do not try this unless you are familiar with the Windows Registry and TCP/IP): HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlTerminal ServerWinStationsRDP-Tcp. Change the listening port from 3389 to something else and remember to update any firewall rules with the new port. Although this approach is helpful, it is security by obscurity, which is not the most reliable security approach. You should ensure that you are also using other methods to tighten down access as described in this article.

4. Tunnel Remote Desktop connections through IPSec or SSH

If using an RD Gateway is not feasible, you can add an extra layer of authentication and encryption by tunneling your Remote Desktop sessions through IPSec or SSH. IPSec is built-in to all Windows operating systems since Windows 2000, but use and management are greatly improved in Windows 10 (see: http://technet.microsoft.com/en-us/network/bb531150). If an SSH server is available, you can use SSH tunneling for Remote Desktop connections.

5. Use existing management tools for RDP logging and configuration

Vpn Microsoft Remote Desktop Download

Using other components like VNC or PCAnywhere is not recommended because they may not log in a fashion that is auditable or protected. With RDP, logins are audited to the local security log, and often to the domain controller auditing system. When monitoring local security logs, look for anomalies in RDP sessions such as login attempts from the local Administrator account. RDP also has the benefit of a central management approach via GPO as described above. Whenever possible, use GPOs or other Windows configuration management tools to ensure a consistent and secure RDP configuration across all your servers and desktops.

Can't Remote Desktop Through Vpn

By enforcing the use of an RDP gateway, you also get a third level of auditing that is easier to read than combing through the domain controller logins and is separate from the target machine so it is not subject to tampering. This type of log can make it much easier to monitor how and when RDP is being used across all the devices in your environment.

Remote Desktop Manager Microsoft Vpn


This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.